Click image to view full size image
Two stage Automatic Temperature Controller With Vertical Pump
Description
Unstable temperature in the process of mold forming always tends to produce unqualified products. According to the principle of heat exchange
Quick Detail:
The XCM automatic mold temperature control make use of water and high property heat transferring oil as a medium to keep a properstable temperature in the process of mold forming so as to guarantee high quality of products and raise the productive efficiency
Main Features:
1. Use computer P.I.D temperature control instruments and meter, the parameters are automatic
2. Safe protection and perfect trouble indication system
3. Integeral stainless steel sharping, less tube lose, even heating, explosion-resistant of high pressure
4. More imorted elements, long using life, promote quality stability
5. The cooling of board-type heat exchange, quilckly reduce the temperature can meet the requirement of low temperature controlling.
6. Vertical pump. The flow of vertical pump can be always kept steady and its service life keeps long.
7. Stainless medium tank. This interior tank will not get rust for long term, which is sure to prevent from any blockade of pipes and keep long-term service of pump.
8.Minimize products wastagee. The mold ca reach the required temperature right at the beginning of operation, thus can obviously minimize products shortage, maintain proper temperature.
| Model | XCM-6-W | XCM-9-W | XCM-12-W |
| Temp() | water90(120) | ||
| Heat Capacity(kw) | 6 | 9 | 12 |
| Pump Power(kw) | 0.37 | 0.75 | 0.75 |
| Max. Pump Volume(L/min) | 40 | 135 | 135 |
| Max. Pump Pressure | 30m | 25m | 25m |
| Pump Mold | Horizonal | ||
| Cooling Method | Direct(120) or Indirect Cooling(95) | ||
| Mold Connecting | 3/8” 2×2 | 3/8” 4×2 | 3/8” 4×2 |
| External Size(mm) | 580×350×780 | 680×350×780 | 680×350×780 |
| Wt.(kg) | 62 | 90 | 110 |
| Model | XCM-6-O | XCM-9-O | XCM-12-O |
| Temp() | oil 170(200) | ||
| Heat Capacity(kw) | 6 | 9 | 12 |
| Pump Power(kw) | 0.35 | 0.75 | 0.75 |
| Max. Pump Volume(L/min) | 40 | 135 | 135 |
| Max. Pump Pressure | 30m | 25m | 25m |
| Pump Mold | Horizonal | ||
| Cooling Method | Indirect Cooling | ||
| Mold Connecting | 3/8” 2×2 | 3/8” 4×2 | 3/8” 4×2 |
| External Size(mm) | 580×350×780 | 680×350×780 | 680×350×780 |
| Wt.(kg) | 75 | 100 | 125 |
XCM - Automatic Temperature Controller With Vertical Pump For Industrial
